Volver al blog
Guías prácticas 2026-11-21 Bicycle Superstore 0 vistas

How to Choose a Quick Release Rear Axle for Your Bike

How to Choose a Quick Release Rear Axle for Your Bike

Learn what to look for when selecting a quick release rear axle, including sizing, compatibility, and when to replace. Covers the 10x145mm axle as a common example.

What to Look For in a Quick Release Rear Axle

A quick release rear axle is a straightforward replacement part, but choosing the right one depends on two key measurements: diameter and length. If either is wrong, the wheel won't sit securely in the frame.

The most common road and hybrid sizes are 10mm diameter axles in lengths from 145mm. Mountain bikes often use thru-axles, but older or entry-level models still use 10mm quick release. Always check your existing axle before ordering.

How to Measure Your Current Axle

Remove the rear wheel and slide the axle out of the hub. Measure the overall length from tip to tip, not including the quick release skewer. Then measure the diameter of the smooth part that goes through the hub. These two numbers — diameter x length — are all you need to find a match.

For example, a 10mm diameter axle that is 145mm long is written as 10 x 145mm. That is the size used on many older mountain bikes and some touring bikes.

Example: Quick Release Rear Axle 10 x 145mm

  • Quick Release Rear Axle 10 x 145mm: This replacement rear axle is for use with quick release bikes and provides a reliable and secure connection between your frame and rear wheel. Size: 10mm diameter x 145mm long. Made in Taiwan. If your bike uses a 10mm diameter rear axle with a 145mm overall length, this is a direct replacement. The made-in-Taiwan construction indicates basic quality suitable for standard riding.
    Quick Release Rear Axle 10 x 145mm
    Quick Release Rear Axle 10 x 145mm

Check Your Frame and Hub Compatibility

Not all 10mm axles are the same. The axle must pass through both dropout slots and thread into the derailleur hanger or the opposite dropout. The length must be enough to reach the threads, but not so long that it sticks out past the frame.

Quick release axles are not interchangeable with thru-axles. If your bike has a thru-axle, a quick release axle will not fit. Conversely, if your frame has open dropouts, a thru-axle cannot be used. Stick with the system your bike was designed for.

When to Replace a Rear Axle

Replace the axle if it is bent, has stripped threads, or shows visible wear where it contacts the bearings. A bent axle causes a wobble that no amount of truing will fix. Stripped threads mean the quick release skewer cannot tighten securely.

If your axle is simply rusty but still straight and smooth, a clean and regrease may be enough. However, if the bearings are also worn, replacing the axle and bearings together is often simpler.

Artículos relacionados

Customer Service
Inicio
Productos
Carrito
Perfil